PC-SVMX Standard Clip – Vario Self Tapping Surface Mount Male Extra Heavy Duty 15kg/33lb
PC-SF1 Standard Clip – Surface Mount Female
CP-01ST Standard Center Point – Red Plastic Stainless Steel Tip
CT-17 Panel Removal Tool Painted Panel (Glass Sucker 40kg/88lb)
CT-06S Service Kit
Standard Range: the panel fastening system that started a revolution
The Standard Range (PC series) is Fastmount's original clip system, manufactured in New Zealand and installed in over 4,000 vessels worldwide. Its male-female clip mechanism allows rigid panels to be fitted and removed without visible fixings, delivering a clean, professional finish. The female clip is mounted to the structure (bulkhead, framework, or wall) and the male to the back of the panel, creating a mechanical bond that requires no adhesives or face-side perforations.
Each component exceeds 500 insertion and extraction cycles during factory testing. The engineering-grade polymer withstands moisture, temperature fluctuations, and vibrations common in marine vessels, motorhomes, and architectural interiors. Distributed in Spain and Portugal by Riviera Trade, the Standard system has become the benchmark for shipyards, furniture manufacturers, and architecture studios seeking fast, repeatable access to concealed services behind panelling.
Technical specifications
| Parameter | Value |
|---|---|
| Load capacity | 3 kg to 15 kg depending on model (VM1: 5 kg, VMX: 15 kg) |
| Panel-to-structure gap | Approx. 8 mm (depending on combination) |
| Material | Engineering-grade polymer (POM/PA) |
| Female mounting | Self-tapping (F1A), surface mount (SF1), side mount (RF1), Auto Fit (AF1) |
| Male mounting | Self-tapping (M1B, M2H), surface mount (SM2, SM2H), Vario (VM1, VMX) |
| Test cycles | 500+ insertions/extractions |
| Origin | Manufactured in New Zealand |
Application guide: when to choose Standard
The Standard Range is the most versatile system in the Fastmount catalogue. It is the right choice when panel thickness and available depth are not critical constraints, and medium-to-high load capacity is needed. Wall panels in cabins, demountable ceilings, access hatches to electrical installations, and decorative bulkheads are its most common applications.
If the space behind the panel is limited, consider the Low Profile Range (4 mm) or the Very Low Profile Range (2.5 mm). For environments requiring corrosion resistance or fire certification, the Metal Range offers stainless steel and nickel-plated clips.
Frequently asked questions
A self-tapping clip (such as PC-M1B or PC-F1A) screws directly into the panel or structure material, creating its own thread. A surface-mount clip (such as PC-SM2 or PC-SF1) is bonded using VHB double-sided tape or screws onto a flat surface. Self-tapping for timber, MDF, and plywood; surface mount for thin composites or metal.
Yes. The engineering-grade polymer will not corrode or degrade with moisture. For extreme environments requiring marine certification (SOLAS, MED) or fire rating, consider the Metal Range in stainless steel.
One clip pair every 300-400 mm around the panel perimeter, plus intermediate points if the panel exceeds one metre in length. For a typical 600 x 600 mm panel, 4 to 6 pairs are common.
A drill with the CT-09 bit (10 mm Forstner) and the CT-10 installation tool for self-tapping males. For PC-F1A females: CT-15 thread tap and CT-03 insertion tool. CP-01ST and CP-02ST centre points assist alignment. The CT-08 yard kit includes all 6 essential tools.
Related ranges
- Low Profile Range -- Reduced gap (4 mm), ideal for cabinet doors and thin panels.
- Very Low Profile Range -- Minimum gap (2.5 mm), for upholstery and premium furniture.
- Metal Range -- Stainless steel for aggressive environments and fire rating.
Need help selecting the right products?
Contact our team for personalised recommendations based on your project requirements.
Contact us Buy now